OEM Electric Power Line Hardware Zinc-Clad Steel Earth Grounding Rod

• Customization: Available
• Technics: Cold Pressing
• Standard: ISO
• Model NO.: Stamping part
• Usage: Line Fittings
• Type: Pull-Line Fitting
• Name: Electrical Ground Earthing Rod
• Available Service Mode: OEM; ODM
• Function: Connect with Grounding, Disperse The Lightning
• Certification: ISO 9001
• Color: Silver
• Transport Package: Pallet
• Specification: common
• Trademark: AIRMAX
• Origin: Ningbo, China
• Production Capacity: 20000pieces/Day

Product Description

Product Description

 

Security Portable Earthing Device Electric Power Fittings Unthreaded Ground Earth Rod Set

Name	Ground rod set
Material	Zinc,Carbon Steel
Process	Galvanizing
Surface treatment	Hot dipped galvanized
Application	Ground protection
Trademark	AIRMAX
Certification	ISO 9001
Origin	Ningbo,China

 

Detailed Photos

 

PRODUCT IMAGE

 

 

Product introduction

 

Composition
         Ground Rod cable clamp is made of pressure casting alloy aluminium,the structure is of the helical compaction type,none of unfilled corner and crack,earth rod is flexible and  convenient,insulation rod has smooth surface. 
         The main parts of High voltage ground rod is composited by wire bent hook clamp or Bus bar flat clip,jumper short route, grounding tail, wiring nose, bus tube, grounding terminal clip or five anti-blocking clip, grounding steel fiber and grounding operation rod. Wire clamp adopts high-quality hot copper (or cooked aluminum) die-cast surface polishing and wire nose fastening connection, wire is an important part of "portable short-circuit grounding wire"
         The portable short-circuit grounding wire is divided into two types: split-phase type and combined type. Applicable voltage: 500V, 10kV, 35kV, 110kV, 220kV, 500kV, etc. It is suitable for power plants, power supply, telecommunications, railway, subway and other power transformation users and construction units, and can customize special specifications of ground wires according to requirements.

Classification
Copper-clad steel grounding rod:
Copper-clad steel grounding rod is the choice of good flexibility, carbon content of 0.10%-0.30% of high-quality low carbon steel, using a special process to cover the highly conductive electrolytic copper uniformly to the surface of round steel, the thickness of 0.25-0.5mm, the process can effectively slow down the ground rod in the underground oxidation speed, the grounding rod can be divided into single and combination of two kinds. The single can be flat at one end, and can be threaded at one end of the roll. The two ends of the combination need to be threaded on the roll. The thread is processed by the roll thread groove to maintain a close connection between the steel and copper to ensure high strength and excellent electrical grounding performance. The product has been widely used in electric power, petrochemical, transportation, civil construction, large mechanical equipment grounding system, with long service life, economy, excellent electrical conductivity and so on.
 

Zinc-clad steel ground rod:

Zinc-clad steel grounding rod is the choice of good softness, carbon content in 0.10%-0.30% of high-quality low carbon steel, the use of hot dip galvanizing process, with uniform galvanizing layer, strong adhesion, long service life advantages. Zinc layer thickness ≥70 um, metal corrosion resistance is strong suitable for general natural environment and wet, salty alkali, acidic soil and chemical corrosive medium of the special environment, widely used in power plants, substations, transmission line towers, communication base stations, airports, railways, subway stations, all kinds of high-rise buildings.
 

Copper earth rod:

 Copper ground rod has excellent electrical conductivity , the electrical conductivity of the pure copper ground rod is 10 times that of the same size copper-plated steel; The surface is more smooth and clean, the senior craftsmen use the skilled machine tool to create, the surface is natural copper color, clean and flawless; Long service life, the corrosion resistance of copper in soil is 10-50 times that of steel, more than 3 times that of galvanized steel, and the performance is stable, and the life can reach more than 60 years
 

Stainless steel earth rod:

The stainless grounding rod is made of high quality stainless steel material, which is mainly used for power plants, substations, line poles and towers, communication base stations, airports, railways, petrochemical plants, oil depots and other places with high rust prevention

 

Electrolysis ion grounding rod:

Electrolytic ion grounding rod is a kind of efficient grounding system suitable for high resistance position. It adjusts the resistivity of the surrounding soil by gradually releasing the surrounding soil, and maintains the resistivity of the soil at a balanced and reasonable level, so as to achieve the effect of long-term improvement of soil resistance. Suitable for the complex geographical environment such as high acid and high alkali.

usage scenario:
Ground rod has the following specific application scenarios in real life:
1. Power system: including substations, transmission line poles and towers, power plants, etc., used to ensure the safety of power equipment and personnel, and to prevent the harm caused by lightning strike and leakage.
2. Communication base station: ensure the normal operation of the communication equipment, and reduce the interference and damage of lightning and static electricity to the equipment.
3. Lightning protection of buildings: especially in high-rise buildings, the grounding rod helps to introduce lightning into the earth and reduce the risk of lightning strike on buildings.
4. Industrial facilities: such as chemical plants, oil refineries, etc., to prevent static accumulation of fire or explosion, and to ensure the reliable grounding of electrical equipment.
5. Electronic equipment room: server room, data center, etc., to provide stable grounding protection for sensitive electronic equipment to prevent electromagnetic interference and overvoltage.
6. Photovoltaic power generation system and wind power generation facilities: to ensure the safe operation of power generation equipment and related electrical components.
7. Railway system: including signal equipment, traction power supply system, etc., to improve the stability and safety of the system.
8. Public facilities: such as street lights, billboards and other outdoor facilities to prevent lightning strikes and electrical failure.

AIRMAX AL CO.,LIMITED is a professional manufacturer who provides the precision stamping parts, deep drawing parts After years of steady development, we to great , professional tooling team.  we not only have standard parts also can achieve customized production, according to customer demand, the production of non-standard parts, and has a great price advantage.

Mainly products:
Telecom products for aerial cable networks with copper and optical fiber technologies(Ground rods , flanges, Telecommunication rod extension fittings, Cross arm). Drum closure , locking clamp for various industries packaging of petroleum, chemical, oil, food productsHVAC ventilation duct systems hardware(Pipe corners, pipe flanges, TDC & TDF corners), And other customized parts for  door and window accessories,  automobile hardware fittings high-pressure iron tower metal fittings
The products are mainly exported to Europe, South Africa and other countries. Some patented products can be exported to and from European hardware supermarkets.

Material:
Steel; Alloy steel, Stainless Steel; Aluminum; Iron; Alloy Aluminum; Clod Rolled sheet; Brass ect, With surface treatment by Zinc Galvanized; chrome, nickel plated, black oxide, power coated, painting ect.



1. Are you factory or Trading company?

A: We are factory with professional team, so our price is very competitive ex-factory price and you are welcome to visit the factory.

2. Can i have the prototypes for testing before tooling?

A: Yes, our factory have team to support prototypes with machining process to fabricate them for your testing.

3. What's the delivery time?

A: For stander parts, within 15 days after receiving your payment.

For customer order, about 15-30 days after confirmed every details.

4. What's your packing?

A:Our normal packing is cardboard,pallet or customized.

5. What term of payment you usually use?

A: T/T ,Western Union,L/C at sight.

6. What's kinds of information you need for quote?

A: Kindly please provide the drawing .dwg,weight and packing requirement.

7. What's your product range?

A: custom machined/stamped/casting/extrusion/spring.